Type A: both ends of the connection and the reinforcing plate affixed to the insulation tape;
Type B: reinforcing plate cross affixed directly on the insulating tape;
Type C: both ends of the reinforcement plate in the conductor paste;
Type D: both ends of the reinforcement plate to cross directly in the conductor paste; type E: reinforcement plate attached to one end of the insulating adhesive tape, the other end is directly solder;
Type F: both ends of the reinforcement plate attached to the insulating tape on the inside half of the strip;
Type G: direct solder ends.
FFC technical parameters:
The conductor number N: copper conductor cable in number;
The spacing between two adjacent conductors P: the distance from the centre line;
M: the external margin between a conductor wire from the edge of the center line of the:
The whole distance TP between two conductors: most outside center linedistance, TP=P* (N-1);
The total width of W: intermediate cable two edge distance, W=P* (N+1);
The total length of the TL: cable ends of the distance;
Insert the thickness of the TT: Cable two connecting ends of the thickness;